Qty	Make	Model	Control	X-axis	Y-axis	Z-axis	Comments
1	Okuma & Howa	Millac 4VA	Fanuc	32"	17"	18"	-
2	Okuma & Howa	Millac 5VA	Fanuc	51"	28"	31"	-
1	Okuma & Howa	Millac 5VA	Fanuc	41"	25"	22"	-
1	Okuma & Howa	Millac 6VA	Fanuc	51"	25"	23"	-
1	Okuma & Howa	Millac 7VA	Fanuc	71"	32"	24"	-
1	Kira	KV 5MC	Fanuc	25"	15"	20"	-
1	Fadal	VMC 4020	CNC 88	40"	18"	19"	-

Qty	Make	Model	Axes	Comments
2	Tsudakoma	RNCB-402	4	Full rotary axis
1	Tsudakoma	TRNC-201	4/5	Simultaneous full tilt and rotary axes
3	Tsudakoma	TRNC-301	4/5	Simultaneous full tilt and rotary axes

Qty	Make	Model	Control	X-axis	Y-axis	Z-axis	Comments
1	Toyoda	FH55	Fanuc	28"	28"	22"	2 pallet with 1deg indexing table
1	Makino	A88	Fanuc	35.4"	31.5"	38"	2 pallet with 1 deg indexing table

Qty	Make	Model	Control	Max cut dia	Max cut length	Comments
1	Okuma & Howa	ACT 3	Fanuc	8"	22"	-
1	Mori-Seiki	SL-5H	Fanuc	14"	40"	Programmable tailstock
1	Mori-Seiki	SL-25B	Moric	10"	20"	Programmable tailstock
1	Mori-Seiki	SL-300	MSC-518	16"	27"	Programmable tailstock
1	Nakamura-Tome	SC-300	Fanuc	13"	23"	Programmable tailstock
1	Hardinge	Quest 8/51	Fanuc	14"	20"	Live tooling & tailstock

Qty	Make	Model	Control	Width	Length	Max height
1	Okamoto	16-32 EX	Fanuc 21-GA	16"	32"	18"

Qty	Travels	Comments
5	32" X 9" X 16"	Combination vertical & horizontal
3	23" X 9" X 18"	Combination vertical & horizontal
1	49" X 8" X 16"	Combination vertical & horizontal
1	38" X 10" X 17"	Combination vertical & horizontal
1	48" X 15" X 16"	Combination vertical & horizontal
1	49" X 11" X 18"	Combination vertical & horizontal
1	53" X 12" X 11"	Combination vertical & horizontal
1	64" X 24" X 24"	Vertical
1	33" X 12" X 16"	Vertical

Qty	Comments
8	Various sizes of hydraulic tracer mills up to 130" X 33" X 23"

Qty	Make	Max cut dia	Max cut length
1	Cyclematic toolroom lathe with digital readout	9"	18"
1	Hardinge toolroom lathe with digital readout	9"	18"
1	Chien Yeh engine lathe	12"	53"
1	Herbert turret lathe	10"	12"
2	Microweily engine lathe with digital readout	20"	53"
1	Tos engine lathe with digital readout	24"	80"

Qty	Description
1	Sunnen honing machine
2	Radial arm drill (up to 2" dia drills)
3	4 spindle drill press
4	Single sindle drill press
2	24" band saw
2	Automatic cut off saw. 14" max. dia.

• 3 seats of Mastercam Mill & Lathe ver. 10 (Mastercam X)
• 5 seats of Mastercam Mill ver. 10 (Mastercam X)
• 2 seats of Mastercam Lathe ver. 9
• 8 seats of Mastercam Solids
• 1 seat of Solid Edge
• Mastercam CATIA translator
• CATIA viewer (Enovia DMU)
• 5 seats of Veri-cut
• 1 seat of Veri-cut with machine simulation
• Hewllet Packard Design Jet 450C plotter
• Programming capabilities include 2D, 3D, multi surfaces, 4-axis and 5-axis

• Numerex manual CMM with Virtual DMIS, 28"(x) X 42"(y) X 23"(z)
• Mitutoyo shadow graph to 10X power with Quadra Check II
• Granite surface table 4.0' x 6.0'
• Wilson Rockwell hardness tester, Model 5-TT-BB
• Wilson digital hardness tester, Model B533-R
• Magnaflux conductivity meter, Model FM140
• 14" Motorized Height Gauge - Sylvac - Fowler, Model Z_CAL 350

Qty	Make	Model	Control	X-axis	Y-axis	Z-axis	Comments
1	Okuma & Howa *	Millac 4VA	Fanuc	28"	16"	18"	4th/5th axis capability
1	Okuma & Howa *	Millac 5VA	Fanuc	51"	27"	31"	4th/5th axis capability
1	Okuma & Howa *	Millac 5VA	Fanuc	41"	22"	18"	4th axis capability
1	Okuma & Howa *	Millac 7VA	Fanuc	71"	26"	24"	4th axis capability
1	OKK *	MCV-660	Fanuc	60"	26"	26"	4th axis & 4th/5th axis capability
1	OKK *	MCV-860	Fanuc	80"	34"	28"	4th axis & 4th/5th axis capability
1	Mazak	Variaxis 630	Fusion 640	25"	30"	20"	4th/5th axis capability

Multi Axis Machining Centres
*Vertical machining centres with portable rotary tables

Qty	Make	Model	Control	X-axis	Y-axis	Z-axis	Comments
1	SIP	SIP 740	Fanuc	59.8"	39.9"	42"